background image

9

Caution!

•  Use extreme caution when operating the appliance.

•  At the time of operation, some surfaces of the equipment become very 

hot. Do not touch the heated surfaces of the device. Use only handles 

and grips to handle the device.

•  Parts of the device that become hot during operation remain hot 

for some time even after the device is turned off and the power is 

disconnected.

  There is a risk of burns from the hot surface! There is a risk of very 

serious injury!

•  Always keep the device under supervision during use and operation!

•  This equipment is not intended to be operated by an external 

programmer, automatic timer or remote control, as there is a risk of fire if 

the appliance is covered or incorrectly positioned.

•  Do not leave the unit unattended during operation, especially if children, 

incompetent persons or animals are nearby.

•  To operate the equipment, use only its own controls and, if necessary, 

the remote control.

•  Do not place any objects on the device, or let foreign objects enter the 

openings. Do not use the device near loose textiles - curtains, hinges 

and the like. Make sure that no dirt from the environment, such as dirt, 

gets into the machine openings. clusters of dust, fibers and the like.

•  Be careful during use and operation of the machine to avoid contact with 

rotating parts with your fingers, hair, loose decorative chains, or loose 

clothing.

•  Do not place any containers of water or any other liquid on the device to 

prevent liquid from spilling and entering the inside of the machine.

•  To avoid a dangerous situation, do not touch the device while your 

hands are wet or wet.

•  Do not use the appliance near bathtubs, showers, washbasins or other 

containers containing water, including swimming pool. Do not remove 

the device if it falls into the water. First, unplug the power cord from the 

wall outlet and then remove it from the water. In such cases, take the 

equipment to a specialist garage to check that it is safe and functioning 

properly.

  There is a risk of electric shock!

  There is a risk of damage to the equipment or other material damage!

Caution!

•  Keep children away from the machine. The device may tip over and 

cause serious injury. Mechanical damage (breakage or breakage of 

parts and covers) of the device can cause serious injury.

  There is a risk of serious injury!

  There is a risk of damage to the equipment or other material damage!

•  Before connecting the equipment to the mains, make sure that the main 

switch (control knob) is in the “0” “OFF” position.

Summary of Contents for VL-201 A















Reviews: