15
EN
Preparation and operation
Unpack the device, check it for damage, and remove all packing
material.
Electrical connection requirements
• Before connecting the appliance to the mains, make sure that the
mains voltage corresponds to the information on the rating plate
located on the mains base and the base of the kettle.
• The device may only be connected to a 230 V ~, 50 Hz electrical
socket.
Before using boiled water from the kettle for the first time, boil
the water at least for 3 times in a kettle filled with water to the
maximum level mark, pour it out and rinse the kettle thoroughly.
1 Unwind the power cord from the base. Place the device on a level
and stable surface.
2 Fill it full with the water. Please observe the MAX water indicators
(the MAX mark is on the end of the steam pipe inside the
channel). Close the lid, otherwise the kettle will not switch off
automatically when the water closes and the water may boil out of
the kettle.
Warning! The water level must be at the maximum of the MAX.
indicator (1.5 l), minimum 0.5 l. Too little water can damage
the heater and too much water can cause water to leak during
boiling.
3 Use the base for the mains. Place the kettle on the base with the
power supply. Place the kettle with the output for water facing
away from you.
After placing the kettle on the base, the kettle is ready for
operation.
4 To operate the kettle, set switch 5 0/I to position I (on).
WARNING!
Never fill the kettle when it is placed on the base. If the kettle is
overfilled, boiling water may splash out.
Do not run the kettle abruptly. Improper use of the kettle may
adversely affect its service life.
If you accidentally switch on the kettle without water, the thermostat
will automatically switch off the kettle when a certain temperature
is reached. Switch 5 switche to position 0 (off) and the light goes
out. The kettle can be restarted after a few minutes as soon as the
stainless steel bottom cools down.
The body of the kettle with spout and cover is made of fragile
material therefore, it requires very careful handling. It can be
severely damaged in the event of an impact – the kettle can be
broke.