Assembly
1
Loosen and remove the nut on the motor (4).
2
Attach the rear cover (5) to the engine and screw the nut (4) back on.
3
Push the propeller (3) onto the motor shaft (6) and secure it with the nut (2).
The matrix has the opposite thread (left).
4
Slide the front cover on the rear cover (in the correct position) and press
the covers together with two clips and connect the covers to the bottom with
the screw and nut (supplied).
Operation
Before using this device for the first time
• Remove all protective foils and labels from the machine.
1
Plug the machine into a 230 V ~ 50 Hz power supply.
2
Turn on the fan with the switch (10) and set the desired speed (speed
knobs (10)).
3
If necessary, activate the oscillation with the oscillator switch (7) by
pressing down.
4 Switch off the fan with the switch (10).
12
EN
