background image

10

EN

Warning!

•  Place the machine in a location where children cannot freely reach. Do 

not allow children to handle the equipment (play with it) The device may 

tip over and cause very serious injury. Breaking parts and covers of the 

device can cause serious injury.

  There is a risk of serious injury or danger to life! 

  There is a risk of damage to the equipment or other material damage!

•  The device is not designed to be used by persons with disabilities

  reduced physical, sensory or mental abilities. Persons with insufficient 

  experience or knowledge can use it only if other person is responsible 

for them, they know the safety and use the equipment under supervisi-

on.

•  The machine must be used and stored on a stable surface.

•  Always make sure that the space where you want to place the equip-

ment has sufficient space, stability and mechanical strength.

•  Do not place the appliance on an electric or gas cooker or other heat 

sources or near them.

•  Always connect the appliance to a power outlet at normal use and then 

turn on the main switch - the controller.

•  After use, turn off the main power switch - regulator and then pull the 

power cord plug out of the power outlet.

•  When you are not using the machine, clean it, attach it to it or if a fault 

occurs, disconnect the device from the power supply.

•  Do not touch the parts of the machine in motion. Never handle the whis-

kers when connected to the mains.

•  The power outlet and power cord must remain easily accessible for safe 

disconnection from the mains.

•  This equipment is not intended to be operated by a programmer, an ex-

ternal timer or remote control, as there is a risk of fire if the equipment 

is covered or improperly located.

•  Never leave the appliance unattended and freely accessible with the 

power cord loose. Children, incapacitated persons or animals could be 

removed from the power cord.

•  Do not store the device with the cord wrapped around its body. Fold the 

power cord in the way it was folded in its original packaging from the 

  manufacturer.

  There is a risk of serious injury!

Summary of Contents for SL-500C















Reviews: