4
EN
1.3 Electrical safety
• Before connecting the appliance to the power supply for the fi rst time, make
sure that the voltage on the appliance label corresponds to that of the
household electrical outlet.
• The electrical appliance is designed for mains supply 230 V ~.
The electrical safety of the appliance is guaranteed only if it is properly
connected to the electricity grid.
• Only use a power cord with a plug (mains lead) that came with the device and
compatible with a wall outlet. Using another cable may result in fi re or electric
shock.
• Always connect an electrical appliance to an easily accessible power outlet. In
the event of an operating fault, the appliance must be switched off as soon as
possible and disconnected from mains supply.
• Do not pull the power cord / power cord by pulling on the cord/cord. Disconnect
the power cord by pulling the plug behind the power cord / power cord plug.
• If you use an extension cord, check that the total rated (ampere) power of
all devices connected to the extension cord does not exceed the maximum
current rating of the extension cable.
• If you need to use an extension cord or power supply block, make sure that
the extension cord or power pack is plugged into a power outlet, and not to
another extension cord or power supply. Extension power cord or power supply
block must be designed for grounded plugs and plugged into a grounded
outlet.
• The power plug of the appliance must be compatible with the mains socket.
Never use any adapters or modify the socket in any other way. Do not use
inappropriate or damaged soclets.
• To avoid electrical shock, plug the power cables into properly grounded
electrical outlets. If the device is equipped with a 3-pin power supply cord,
do not use adapters that do not have a grounding element or remove the
grounding element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord / power cord of the
appliance to mechanical stress or external heat sources. Damage to the power
cord may result in electric shock.
• If the power cord is damaged, disconnect the appliance from the mains and do
not use it again. If the power cord / power cord is damaged, it must be replaced
by the manufacturer, its service department, or a qualifi ed person to avoid the
risk of electric shock.
• Regularly check and maintain the electrical appliance as well as the power
cable. Disconnect the power plug regularly and clean it if necessary. Pollution
by dust or other substances may cause disruption of the insulating state and
consequently fi re.
• Do not expose the appliance to water or moisture. The ingress of water into
the appliance increases the risk of electric shock. If the power cord is wet
or the appliance gets water, disconnect it immediately from the mains. If the
appliance is plugged into a mains socket and if possible, turn off the power
supply before attempting to disconnect the power supply. If you are pulling wet
wires from a live power source, be very careful.
• If the electrical equipment is installed (connecting) the protective covers are
dismantled, the electrical parts must not be accessible to the user when the
installation is fi nished.
