13
EN
General Operations
Display
The track numbers and playback status are displayed.
Audio setup
1
Turn on the device.
2
Press the volume up/down button to adjust the volume.
The volume is displayed on the display
Using the headphones (not supplied)
When the headphones are plugged into the PHONES headphone jack, the speakers will be
muted and will be played through the headphones.
Setting time
1
Plug the power cord into both the machine and the electrical socket (the following
operations must be performed in standby mode).
2
Press PROG./TIME to activate the time setting mode. The LCD will flash.
3
Press
>
or
.
select the time format 12h or 24h and press the PROG./TIME button
4
Press
>
or
.
set the clock and press PROG./TIME
5
Press
>
or
.
set the minutes and press the PROG./TIME button to confirm the set
time.
Note
After setting the time, the display will go out after a short period of time and time will be
displayed. After disconnecting the appliance from the power supply, it is necessary to reset
the time.