10
EN
Power source
Power supply from the mains
1
Plug one end of the power cord into the AC-IN jack on the device and connect the other
end to an electrical outlet.
2
Press the button
1
(4) to turn on the device and press the FUNCTION button (5) to
select the desired sound source.
Warning!
The power cord is removable and can only be replaced with a network cord with the same
parameters when it is damaged. Replace the power cord with an authorized service or
authorized person. The device is under constant voltage while the power cord is in the
electrical socket, even when the device itself is switched off.
Battery powered
The device can also be powered from batteries.
1
Open the battery compartment cover on the bottom of the device.
2
Insert six 1.5V UM-2 or C (not supplied) batteries at the correct po and -.
3
Close the battery compartment cover.
Notes
• Do not place any other objects in the battery compartment.
• Do not use new batteries together with old ones.
• If you do not use the device for a long time, remove the batteries to avoid possible leakage of
batteries and subsequent corrosion.
• Observe the correct po and -. In case of incorrect battery polarity, the batteries and the
device itself may be damaged.
six 6,5 V battieries, size C (UM2)
Close cover