5
EN
• Do not pull off the power cord by pulling the cable. Disconnect the
power cord by pulling the plug behind the power cord plug.
• If you use an extension cord, make sure that the total rated power of
all devices connected to the extension cord does not exceed the max.
current load on the extension cable.
• If you need to use an extension cord or power supply block, make sure
that the extension cord or power pack is plugged into a power socket,
and not to another extension cord or power supply. The extension
power cord or power supply block must be designed for grounded
electrical plugs and connected to a properly grounded electrical socket.
• The power plug of the appliance must be compatible with the mains
socket. Never use any adapters or modify the socket in any other way.
Do not use inappropriate or damaged drawers!
• To avoid electrical shock, plug the power cables into properly grounded
electrical sockets. If the device is equipped with a 3-pole plug, do not
use adapters that do not have a grounding element or remove the
grounding element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord of the
appliance to mechanical stress or external heat sources. Damage to the
power cord may result in electric shock.
• When the power cord is damaged, disconnect the appliance from the
mains and do not use it again.
• If the power cord is damaged, it must be replaced by the manufacturer,
its service department or a similarly qualified person to avoid the risk of
electric shock.
• Regularly check and maintain the electrical appliance as well as the
power cord and power socket. Disconnect the power plug regularly and
clean it if necessary. Pollution by dust or other substances may cause
disruption of the insulating state and consequently fire.
• Do not expose the appliance to water or moisture. The ingress of water
into the appliance increases the risk of electric shock.
If the power cord is wet or the water has penetrated the water,
disconnect it immediately from the mains. If the appliance is plugged
into a mains socket and if possible, turn off the power circuit before
attempting
unplug the power. If you are pulling wet wires from a live power source,
be very careful.
• If the electrical equipment is installed (connecting) the protective covers
are dismantled, the electrical parts must not be accessible to the user
when the installation is finished.
