10
EN
Sound settings
1
Turn on the unit by pressing and holding
B
for about 2 seconds. The device turns
on. The blue LED will light up (or flash) and a beep will sound.
2
Briefly press the + and - buttons during playback to adjust the volume.
Play music via Bluetooth from a
Bluetooth device
1
Turn on the Bluetooth interface on your Bluetooth device (phone, tablet, etc.). For
details, refer to the operating instructions of the device.
2
Turn on this unit by pressing and holding
B
for about 2 seconds. The device
switches to Bluetooth mode and is ready for pairing (a beep sounds and the blue
LED flashes).
3
On your Bluetooth device (phone, tablet, etc.), search for available Bluetooth
devices.
For details, refer to the operating instructions of the device.
When Crater 9 appears on the display of your Bluetooth device, select it and wait
until your Bluetooth device displays a confirmation of pairing with Crater 9. The blue
LED on this device stops blinking and stays lit. The devices are paired.
4
After pairing, you can start playback on your Bluetooth device. Set the appropriate
volume on it.
For details on playback controls, refer to the operating instructions of the device.
The sound from the paired device will be reproduced by this speaker system.
