Orava Crater-7 Instruction Manual Download Page 2

2

EN

The intended use of the device

 

The device is intended exclusively for the playback of an audio signal from 

a mobile phone or other digital device or source (wirelessly via Bluetooth

® 

technology or also via a cable connection), to the extent specified by technical 

and operating parameters and functions, safety and user instructions and external 

effects of the operating environment.

 

ORAVA electrical appliances are manufactured according to the knowledge 

of the current state of technology and recognized safety and technical rules. 

Nevertheless, incorrect and unprofessional use or use contrary to the intended 

purpose may create a risk of injury or endanger the life of the user or a third party, 

resp. damage to equipment and other property.

Safety instructions for operation and use

•  Electrical equipment is designed and manufactured in such a way as to allow for 

safe operation and use by persons without a professional qualification. Despite all 

the measures that have been

  to the manufacturer for safe use and handling, carry some residual risks and 

associated potential hazards.

•  The following symbols and their meanings have been used on the device and in the 

accompanying documentation to warn of possible hazards:

  This symbol alerts users that the following precautions can be avoided if 

the following precautions are observed when operating the device:

  Danger of serious injury or life threatening!

  Danger of damage to equipment or other damage to  

 

property!

  This designation of electrical equipment means that the device is made 

with an outer cover that protects it from the ingress of water. In this case, it 

is the level of protection against the ingress of intensive spray water from 

all directions (water flow from a nozzle with a diameter of 12.5 mm, at a 

water flow of 10 l / min and a pressure of 50 - 150 kN / m2 for 5 minutes.

Warning!

  The degree of protection of the device is tested under specific technical 

conditions and does not mean that the device is intended for use under 

conditions of permanent exposure to dust and water.

General safety instructions and warnings

•  Before commissioning, we recommend that you carefully read the operating 

instructions and operate the equipment in accordance with the instructions.

•  Failure to follow the safety instructions and warnings is forbidden by the 

manufacturer for any damage to health or property.

•  Always keep the operating instructions together with the device for future use and 

use by new users.

•  Use the appliance only for the intended purpose and in the manner specified by the 

manufacturer.

  It is not a professional device for commercial use.

Operating environment characteristics:

•  Do not use the device in an industrial environment or in an outdoor, adverse 

environment!

  Do not expose your device to:

-   direct sunlight, sources and equipment producing excessive heat,

-   fall, vibration and mechanical stress,

-  excessive dust,

-   water,

-  insect,

-   aggressive effects of the external environment.

•  The operating environment of the device must always be in accordance with the 

basic characteristics set out.

IPX4

Summary of Contents for Crater-7




















Reviews: