12
EN
Preparation and operation
Location
Disconnect the appliance from the power supply before locating it.
Then lay it on and press it against a flat, firm surface so that the suction
cups cling to the surface and the device firmly in place. For better adhe-
sion, we recommend that the suction cups be slightly moistened before
placement.
Grinding
1.
Plug in the machine.
2.
Switch on the device with the 0/I switch by switching it to position I.
Always switch on the device before inserting the knife into the groove!
3.
When the wheel speed is running, you can insert the blade into the
groove.
Approach:
Clean the blade and insert it into the appropriate groove when the grin-
ding wheel rotates. Bend the blade with adequate force so as not to
reduce engine speed There are two abrasive parts as shown in the pic-
ture:
Part 1:
Part 1 is for the first grinding, resp. a rough cut of the blunt knife to
create the correct blade shape. Insert the knife completely to the device
and min. triple it evenly toward you, alternating the groove for the left
and right side grinding.
When grinding the tip of the knife, gently lift the handle to evenly curve
the tip of the tip.
