Oras Electra 6100, Installation And Maintenance Manual

Page: 11 / 48

Cleaning the Filter (see Figures 1 and 2)
If the water flow has decreased, this may be because the filter is clogged. Clean the filter as follows:
– Shut off the water supply to the faucet.
– Remove the connecting hose (7) from the control box.
– Unscrew the connecting nipple (8) and remove the strainer from the nipple.
– Clean the strainer under running water.
– Reassemble the parts.
Troubleshooting
Symptom Cause / Solution
Water flow from the outlet – The sensing range is too low
does not stop, or stops – Check that the photocell is clean
after 40 seconds – The solenoid valve is damaged
Water flow is low and weak – Filter is clogged
No water comes out of the faucet – Check the water supply to the control box
– The solenoid valve is damaged
– Power failure
– The sensor is covered or damaged
– Check the fuse (17) inside the control box:
6100: 0.1 A
6130: 1 A
11 (48)