9
Physical Description
Dome IP Camera
Metal Mounting Kit
Status LED
Reset Button
SD Card Slot
Aviation Connect
Plug in
Built in
Microphone
LENS
Hardware Reboot & Restore
The
Reset
button is used to restore the factory default settings.
Sometimes resetting the system can return the camera to normal
operation.
Restore
- Press and release the reset button with a paper clip or thin
object. The LED light will be out, after few seconds it will relight again.
(
Note
: that all settings will be restored to factory default)
Status LED
The LED indicates the status of the Network Camera.
1)
Green
LED - Power is being supplied to the Network Camera.
2)
Blinking Orange LED – IP camera has been connected and data is
present.
