Oransi EJ 120, User Manual

Page: 10 / 12

Grab the handle near the top of the cover.
Pull the cover from the top toward you. The cover will hinge at the bottom.
Replace the filters.
Close the cover and ensure it is completely closed. If the cover is not fully
closed the air purifier will not power on.
Plug in the air purifier and press the power switch in the back to "On".
Adjust the fan speed to the desired speed. It may take a couple seconds for
the fan to begin spinning.
Filter Access
1.
2.
3.
4.
5.
6.
How to Replace the Filters
Follow the steps above to remove the cover and access the filters. All of our
used filters can be placed directly in the trash. The HEPA filter should be
installed with the rubber seal facing in.
Reset the Filter Replace Indicator
Press and hold the Filter Reset button beneath the flashing light for a few
seconds. The light will turn off and the filter counter will reset.
Ordering Replacement Filters
Visit us at oransi.com or contact our customer service team at
888-281-3948.
M A I N T E N A N C E
10
INSTRUCTIONS ARE LISTED IN NUMERICAL ORDER. SEE AIR PURIFIER
OVERVIEW PAGE FOR REFERENCE.
C A R B O N F I L T E R
H E P A F I L T E R