DARK TERROR
ENGLISH
8
8
POWERING UP
When powering up a valve amplifier, it must be switched to standby for at least four minutes before
being switched to play. This gives the valves time to warm up and will prolong their life.
Good quality standard instruments (shielded) and speaker (non-shielded) cables are essential to a
prolonged and enjoyable relationship with your amp. We recommend that you do not use cables
with sprung or locking jacks as this can cause untimely wear on input and speaker jacks.
Always ensure that a speaker cabinet or combination of speaker cabinets of the correct impedance
is connected to your amplifier before powering up, appropriate combinations are as follows:
8 AND 16 Ohm AMPLIFIERS
1 x 16 Ohm cabinet connected to the 16 Ohm output
1 x 8 Ohm cabinet connected to one of the 8 Ohm outputs
2 x 16 Ohm cabinets each connected to one of the 8 Ohm outputs
Summary of Contents for DARK TERROR
Page 1: ...DARK TERROR ENGLISH...
