Oracle X9-2 Service Manual Download | Manualshive

Page: 7 / 55

background image

1

Overview of System Status Indicators and

LEDs

Learn about various Oracle Database Appliance model indicators and LEDs.

Note:

For information about system features and racking, refer to the Oracle Database
Appliance Owner's Guide. For information about cabling, Oracle ILOM initial setup,
and appliance software setup, refer to the Oracle Database Appliance Deployment
and User's Guide for your model.

•

Oracle Database Appliance X9-2S/X9-2L Status Indicators

Learn about Oracle Database Appliance X9-2S/X9-2L status indicators.

•

Oracle Database Appliance X9-2-HA Status Indicators

Learn about Oracle Database Appliance X9-2-HA status indicators.

Oracle Database Appliance X9-2S/X9-2L Status Indicators

Learn about Oracle Database Appliance X9-2S/X9-2L status indicators.

•

Oracle Database Appliance X9-2S/X9-2L Server Status Indicators

See a description of the front and back status indicators for the Oracle Database
Appliance X9-2S/X9-2L.

Oracle Database Appliance X9-2S/X9-2L Server Status Indicators

See a description of the front and back status indicators for the Oracle Database Appliance
X9-2S/X9-2L.

•

Server Front Panel Status Indicators

See a listing of the various font panel status indicators for the Oracle Database Appliance
X9-2S/X9-2L.

•

Server Back Panel Status Indicators

See a listing of the various back panel status indicators for the Oracle Database
Appliance X9-2S/X9-2L.

Server Front Panel Status Indicators

See a listing of the various font panel status indicators for the Oracle Database Appliance
X9-2S/X9-2L.

The following figure shows the Oracle Database Appliance X9-2S/X9-2L server front panel
includes indicators for the system and storage drives.

1-1

«
...
5
6
7
8
9
...
»

Summary of Contents for X9-2
























































Reviews:

No comments

Related manuals for X9-2

Brand: Harman Kardon Pages: 66

Brand: Alcad Pages: 6

3C410012A - OfficeConnect Remote 531 Access...

Brand: 3Com Pages: 72

Brand: process-informatik Pages: 8

Brand: TRENDnet Pages: 10

Brand: Advantech Pages: 50

Brand: Moxa Technologies Pages: 36

Brand: Disc Makers Pages: 38

Brand: DigiTech Pages: 6

Brand: ExtraHop Pages: 2

Brand: Xcellon Pages: 24

Brand: LST Pages: 1

Brand: Cypress Semiconductor Pages: 18

Brand: Black Box Pages: 12

Brand: Zonet Pages: 1

Modular Fast Fiber Switch Converter MT-RJ

Brand: Lindy Pages: 3

Brand: Intellinet Pages: 32

SmartRack SR42UBEXPKD

Brand: Tripp Lite Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands