Oracle X7 series Administration Manual Download

Page: 40 / 118

Access the Host Console Remotely

The Oracle ILOM Login prompt appears.

Type your Oracle ILOM user name and password.

The default Oracle ILOM user name is

root

and the default password is

changeme

The Oracle ILOM Summary Information page appears.

In the Actions panel, click the Remote Console Launch button.

The Oracle ILOM Remote System Console Plus screen appears.
For more details, see

“Launch a Graphical Remote Console Redirection

Session” on page 29

To use an SSH client connection:

From a serial console, establish an SSH connection to the server SP. Type:

ssh

root@

hostname

Where

hostname

can be the DNS name or the IP address for the server SP.

The Oracle ILOM Login prompt appears.

Type your Oracle ILOM user name and password.

The default Oracle ILOM user name is

root

and the password is

changeme

The Oracle ILOM CLI prompt (->) appears.

To connect to the host console, type:

start /HOST/console

To return to the Oracle ILOM CLI, press the Esc key and the left parenthesis

key (Shift+9).

Related Information

■

Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at:

http://www.

oracle.com/goto/ilom/docs

Oracle X7 Series Servers Administration Guide • September 2017

Summary of Contents for X7 series























































































































Search results

Summary of Contents for X7 series

Reviews:

Related manuals for X7 series

Brands by name

Popular brands

Oracle X7 series, Administration Manual

Search results

Summary of Contents for X7 series

Reviews:

Related manuals for X7 series

Brands by name

Popular brands