manualshive.com logo in svg

Oracle X7 series, Administration Manual

Share
Download
Oracle X7 series Administration Manual Download Page 18

Oracle Hardware Management Pack

You can choose to install all or some of the following Oracle Hardware Management Pack

components:

■

Oracle Server CLI Tools

: The Oracle Server CLI Tools enable you to configure server

settings and retrieve information about the server hardware from the service processor. For

a detailed description of Oracle Server CLI Tools, see 

“Oracle Hardware Management Pack

Utilities” on page 18

.

■

Oracle Server Hardware Management Agent

: The Hardware Management Agent fetches

and pushes information to and from Oracle ILOM.

■

Oracle Server Hardware SNMP Plugins

: You can use the SNMP plugins to monitor the

server from the operating system using an industry-standard SNMP interface.

■

itpconfig

: The itpconfig tool enables you to configure a trap proxy to send traps between

Oracle ILOM and the host server over the Host-to-ILOM Interconnect.

Oracle Hardware Management Pack allows you to enter commands from the operating system

command-line application. This guide details some of the tasks you can perform using the

Oracle Server CLI Tools included in Oracle Hardware Management Pack. For information

about other components mentioned in this section, refer to the Oracle Hardware Management

Pack Documentation Library at 

http://www.oracle.com/goto/ohmp/docs

. To download and

install Oracle Hardware Management Pack, see 

“Accessing Oracle Hardware Management

Pack” on page 32

.

For more information about the software, see the following sections:

■

“Oracle Hardware Management Pack Utilities” on page 18

■

“Oracle Hardware Management Pack Documentation” on page 19

Oracle Hardware Management Pack Utilities

The following table lists and describes the Oracle Hardware Management Pack utilities. The

utilities work with most supported operating systems. Additionally, utility commands can be

scripted to support multiple servers, as long as the servers are of the same type.

Note - 

Oracle Hardware Management Pack includes components that are not included in this

guide. Refer to the Oracle Hardware Management Pack documentation for more comprehensive

information.

CLI Tool

Description

ubiosconfig

Preserve BIOS settings and some service processor settings.

18

Oracle X7 Series Servers Administration Guide • September 2017

Summary of Contents for X7 series























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands