Oracle X4 series Administration Manual Download Page 17

Page: 17 / 240

About the Administration Guide

This guide provides administration procedures for single system management. It includes

information about the tools used and provides procedures for using the tools to perform

administrative tasks.

This section includes:

■

“Single System Management Tools” on page 17

■

“Multiple System Management Tools” on page 18

■

“System Administration Tasks” on page 19

Related Information

This guide supplements the X4-series servers documentation found in the corresponding

documentation libraries.

■

Sun Server X4-2:

http://www.oracle.com/goto/x4-2/docs

■

Sun Server X4-2L:

http://www.oracle.com/goto/x4-2/docs

■

Sun Server X4-4:

http://www.oracle.com/goto/x4-4/docs

■

Sun Server X4-8:

http://www.oracle.com/goto/x4-8/docs

Single System Management Tools

The following table lists the single system management tools and provides links to the sections

that describe each tool.

Tool and Associated Icon

Environment

Overview

Access Instructions

Oracle System Assistant

Utility that boots on

the host.

“Oracle System Assistant

Overview” on page 23

“Accessing Oracle System

Assistant” on page 147

About the Administration Guide

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands