2.
Insert the install USB drive into the rear of the unit (#15 on back panel).
Figure 1-2 Device Back Panel
3.
Login to the Service Processor.
4.
Reset the HOST and connect to the HOST using the following command:
ORACLESP-1907XC3025 login: root
Password:
Detecting screen size; please wait...done
Oracle(R) Integrated Lights Out Manager
Version 4.0.4.33 r128860
Copyright (c) 2019, Oracle and/or its affiliates. All rights reserved.
Warning: password is set to factory default.
Warning: HTTPS certificate is set to factory default.
Hostname: ORACLESP-1907XC3025
-> reset /system << RESET HOST
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
-> start /HOST/console/ << connect to Host console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started. To stop, type ESC (
5.
Wait for the HOST to boot. After about 1 minute, the first boot screen appears.
Figure 1-3 Boot Screen
6.
Press CTRL-P until
[Boot Pop Up Menu Selected]
is displayed on the screen.
Chapter 1
Booting with the USB Drive
1-11
