MPLS & Internet Hybrid
The Oracle Talari D2000 is deployed as an overlay for MPLS while performing routing/firewall
capabilities for internet links. Use this option if recommended by your Sales Architect, or if
you have an MPLS/Internet hybrid network and will not be using the CE Router Replacement
functionality of Oracle SD-WAN Edge.
Other Options
There are other deployment options, and our Talari Implementation team members will assist
you with planning and deploying your new appliance.
Installation Option: Easy 1st Install
For use with Oracle Talari D2000 as a Router (Gateway, Fail to Block), Layer 2 Fail to Wire
(Overlay), MPLS & Internet Hybrid.
Easy 1st Install Site Deployment Criteria
NCN:
•
Easy 1st Install can be used once the Network Control Node (NCN) has been set up for
your network.
•
Active Appliance Package: The NCN must be running an active configuration which
includes the Oracle Talari D2000 for the site being installed.
Client Side Connectivity:
•
Internet, DHCP, and DNS connectivity to the management interface are required to use
Easy 1st Install. If one or more are not available, please see the instructions for manual
installation. If the management interface is connected to the LAN segment, communication
with the public Internet will be blocked and Easy 1st Install will fail.
•
Cable the LAN and WAN ports in accordance with the Talari configuration for the site.
Use NCN to Upload Client Package to Registration Server
1.
Log in to the Web Console of the NCN.
2.
Navigate to Configuration > Easy Install.
3.
Locate the Site name of the Oracle Talari D2000 being deployed.
4.
Click the Edit pencil to open the Set Serial Number window.
5.
Enter the serial number of the Oracle Talari D2000 being deployed and click the Set Serial
Number button.
The serial number may be found on the top of the Oracle Talari D2000 above the left-hand
drive bays.
6.
Observe the Upload/Activate column. Click the Upload/Activate text when it appears.
7.
Continue to observe the Upload/Activate column. Once the text reads Upload Complete,
proceed to the next section.
Deploy the Talari Appliance
1.
Cable the Oracle Talari D2000 with the provided cables.
Chapter 1
Installation Option: Easy 1st Install
1-6
