Oracle StorageTek SL3000, Manual

Page: 177 / 216

FC-SCSI Element Numbering
Library Addressing Reference E-11
Default SCSI Numbering
Default SCSI Storage Element (Cartridges) Numbering Scheme
1.
The numbering starts at 2000 in the upper left slot on the rear wall of the left-most
module.
2.
The numbering increases from top to bottom and left to right.
3.
When the numbering reaches the last slot on the rear wall, it crosses to the front
wall of the left-most module (A to B in
Figure E–6 ).
4.
The numbering continues top to bottom, left to right, and ends at the lower right
slot of the right-most module.
Figure E–6 SCSI Storage Element Numbering
Default SCSI Data Transfer Element (Drives) Numbering Scheme
1.
The numbering starts in the upper left drive slot in the Base Module.
2.
The numbering increases from left to right and top to bottom (skipping any empty
drive slots).
3.
When the numbering reaches the lower right drive slot on the Base Module, it
crosses to the Drive Expansion Module (A to B in
Figure E–7 ).
4.
The numbering continues left to right, top to bottom, and ends at the lower right
slot of the DEM.
Note: The default numbering pattern assumes you have a
non-partitioned library using the default "left to right" capacity
configuration.