Oracle SPARC T5-8 Service Manual Download

Page: 46 / 206

View Log Files (Oracle Solaris)

SPARC T5-8 Server Service Manual • November 2015

■

“View Log Files (Oracle ILOM)” on page 46

View Log Files (Oracle Solaris)

The error logging daemon,

syslogd

, automatically records various system warnings, errors, and

faults in message files. These messages can alert you to system problems such as a device that

is about to fail.

The

/var/adm

directory contains several message files. The most recent messages are in

the

/var/adm/messages

file. After a period of time (usually every week), a new

messages

file is automatically created. The original contents of the

messages

file are rotated to a file

named

messages.1

. Over a period of time, the messages are further rotated to

messages.2

and

messages.3

, and then deleted.

Log in as superuser.

Type:

more /var/adm/messages

To view all logged messages, type:

more /var/adm/messages*

Related Information

■

“Check the Message Buffer” on page 45

■

“View Log Files (Oracle Solaris)” on page 46

View Log Files (Oracle ILOM)

View the event log.

show /SP/logs/event/list

View the audit log.

show /SP/logs/audit/list

Related Information

■

“Check the Message Buffer” on page 45

Summary of Contents for SPARC T5-8















































































































































































































Search results

Summary of Contents for SPARC T5-8

Reviews:

Related manuals for SPARC T5-8

Brands by name

Popular brands

Oracle SPARC T5-8, Service Manual

Search results

Summary of Contents for SPARC T5-8

Reviews:

Related manuals for SPARC T5-8

Brands by name

Popular brands