manualshive.com logo in svg

Oracle SPARC T5-8, Service Manual

Share
Download
Oracle SPARC T5-8 Service Manual Download Page 45

Interpreting Log Files and System Messages

Detecting and Managing Faults

45

http://www.oracle.com/pls/topic/lookup?ctx=oc122

6.

Determine your next step.

■

If you are servicing a component, return to the procedure for that component.

■

If you are upgrading the server, return to 

“Server Upgrade Process” on page 59

.

Related Information

■

“PSH Overview” on page 41

■

“Check for Faults” on page 41

■

“Server Upgrade Process” on page 59

Interpreting Log Files and System Messages

With the OS running on the server, you have the full complement of Oracle Solaris OS files and

commands available for collecting information and for troubleshooting.

If PSH does not indicate the source of a fault, check the message buffer and log files for

notifications for faults. Drive faults are usually captured by the Oracle Solaris message files.

These topics explain how to view the log files and system messages.

■

“Check the Message Buffer” on page 45

■

“Understanding Diagnostics” on page 25

■

“Managing Faults” on page 41

Check the Message Buffer

The 

dmesg

 command checks the system buffer for recent diagnostic messages and displays

them.

1.

Log in as superuser.

2.

Type:

# 

dmesg

Related Information

■

“View Log Files (Oracle Solaris)” on page 46

Summary of Contents for SPARC T5-8















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands