Chapter 2
Installing the External I/O Expansion Unit in a Rack
2-9
2.4
Installing the Cable Management Unit
At the rear of the rack, install the cable management support brackets:
1. Use an antistatic strap for this procedure.
2. Place the support brackets just above the chassis mounting brackets (
)
and loosely attach the support brackets to the rack with two screws each.
Do not tighten the screws yet.
Note –
The cable management unit includes one cable plate, either type A
(
) or
type B (
■
Use the type A cable plate in racks that allow the routing of cables along both
sides of the rack.
■
Use the type B cable plate in racks that allow the routing of cables only along the
right side of the rack.
Summary of Contents for SPARC Enterprise M4000
Page 4: ......