Adding Tape Devices to an Administrative Domain
Configuring and Managing the Administrative Domain
5-15
9.
In the
World Wide Name
field, enter a worldwide name for the tape device, if
required.
10.
In the
Barcode reader
list, select one of these options to indicate whether a barcode
reader is present:
■
yes
Select this option to indicate that the tape library has a barcode reader.
■
no
Select this option to indicate that the tape library does not have a barcode
reader.
■
default
Select this option to indicate that Oracle Secure Backup should automatically
determine the barcode reader using information reported by either the tape
library, the external device file, or both.
11.
In the
Barcode required
list, select
yes
or
no
. If you specify
yes
, then Oracle Secure
Backup refuses to use any tape that lacks a readable barcode.
By default, Oracle Secure Backup does not discriminate between tapes with
readable barcodes and those without. This policy ensures that Oracle Secure
Backup can always solicit a tape needed for a restore operation by using either the
barcode or the
volume ID
.
12.
Set whether the tape library should use automatic cleaning.
13.
In the
Unload required
list, select
yes
or
no
to specify if an unload operation is
required before moving a tape from a tape drive to a storage element.
The default value is
no
.
14.
Select an ejection type. Your choices are:
■
Automatic
Whenever a volume becomes eligible to be ejected from the tape library,
Oracle Secure Backup moves that volume to an export element and notifies
the backup operator that it is available there. If no export elements are
available, then Oracle Secure Backup requests operator assistance.
■
On demand
Whenever a volume becomes eligible to be ejected from the tape library,
Oracle Secure Backup marks the volume to that effect. A media movement job
then waits for the operator to reply to the job. The operator replies to the job
through the job transcript. When the operator replies to the job to continue,
Oracle Secure Backup ejects all such volumes through export elements.
■
Manual
No automation is used to eject volumes from the tape library. The backup
operator determines which storage elements contain volumes ready to be
See Also:
"Tape Device Names"
on page 5-11 for more information
on World Wide Names
See Also:
"Configuring Automatic Tape Cleaning for a Library"
on
page 5-16
Summary of Contents for Secure Backup 10.3
Page 8: ...viii ...
Page 26: ...About Upgrade Installations 1 16 Oracle Secure Backup Installation and Configuration Guide ...
Page 82: ...Using obtool 4 14 Oracle Secure Backup Installation and Configuration Guide ...
Page 152: ...Installation and Configuration D 6 Oracle Secure Backup Installation and Configuration Guide ...
