Oracle Secure Backup 10.3 Installation And Configuration Manual Download Page 21

Page: 21 / 174

System Requirements for Oracle Secure Backup

Introduction to Oracle Secure Backup

1-11

System Requirements for Oracle Secure Backup

For the list of operating systems, web browsers and

Network Attached Storage (NAS)

devices supported by Oracle Secure Backup, see Certify on My Oracle Support at the
following URL:

http://support.oracle.com

Information about every

tape device

supported by Oracle Secure Backup is available

at the following URL:

http://www.oracle.com/technology/products/secure-backup/

This section contains these topics:

■

Disk Space Requirements for Oracle Secure Backup

■

Other System Requirements for Oracle Secure Backup

■

Linux Media Server System Requirement: SCSI Generic Driver

Disk Space Requirements for Oracle Secure Backup

When you install Oracle Secure Backup on Linux or UNIX, you load an install package
for a particular operating system and perform the installation with the install package.

Table 1–1

describes approximate disk space requirements.

Table 1–2

describes approximate disk space required for an installation of Oracle

Secure Backup on Windows with and without the administrative server.

The disk space required for the

Oracle Secure Backup

catalog

depends on many

factors. But as a general rule, plan for catalog space equal to 250% of your largest index
created after a backup.

See also:

■

Chapter 4, "Oracle Secure Backup User Interfaces"

for details on

using the different Oracle Secure Backup interfaces.

■

Oracle Database Backup and Recovery Advanced User's Guide

for

details on using

Recovery Manager (RMAN)

for Oracle database

backups

Table 1–1

Disk Space Requirements for Oracle Secure Backup on Linux and UNIX

Oracle Secure Backup Installation

Disk Space

Linux

75 MB

Solaris

130 MB

HP-UX

130 MB

AIX

610 MB

Table 1–2

Disk Space Requirements for Oracle Secure Backup on Windows

Oracle Secure Backup Installation

Disk Space

Administrative server (can include the media server, client, or both)

48 MB

Media server, client, or both (no administrative server)

31 MB

Summary of Contents for Secure Backup 10.3















































































































































































Search results

Summary of Contents for Secure Backup 10.3

Reviews:

Related manuals for Secure Backup 10.3

Brands by name

Popular brands

Oracle Secure Backup 10.3, Installation And Configuration Manual

Search results

Summary of Contents for Secure Backup 10.3

Reviews:

Related manuals for Secure Backup 10.3

Brands by name

Popular brands