The system status is displayed in the bottom left corner of the status bar of
theGUI. A round green circle indicates that all hardware components in the
Pillar Axiom system have successfully started and are operating normally. If
the System Status icon is a yellow triangle (which indicates a
warning
condition) or a red circle (which indicates a
critical condition), click Monitor >
Hardware and note which components do not display a green icon and do not
have a Normal status.
10 Confirm that all components are powered on and that all cables are
correctly and securely connected.
If a cabling problem exists, the Pillar Axiom system might show the affected
components with a warning status.
If a flashing upside down triangle appears in the lower left corner of the status
bar of the GUI, click on the triangle to see if an error exists. The Monitor > Hardware
screen can assist you in identifying the error through the warning status icon for
the following:
● private management interface (PMI) links
● private interconnect wiring errors
● Pillar Axiom components
If there is a connection error, verify that the cables are all fully seated and
properly connected.
Refer to the
Pillar Axiom SSF Cabling Reference for more information. If the error
persists, contact the Pillar World Wide Customer Support Center.
Chapter 7 Initial Configuration
Start the Graphical User Interface
148