manualshive.com logo in svg

Oracle Netra SPARC S7-2 Series, Administration Manual

Share
Download
Oracle Netra SPARC S7-2 Series Administration Manual Download Page 38

Obtaining the OpenBoot Prompt

Obtaining the OpenBoot Prompt

There are several ways to reach the OpenBoot prompt (

ok

).

Note - 

If you have any problems reaching the OpenBoot Prompt by your chosen method, refer

to some alternatives in 

“Obtain the OpenBoot Prompt Under Various Conditions” on page 21

.

■

“OpenBoot Prompt” on page 38

■

“Obtain the OpenBoot Prompt (Oracle Solaris)” on page 39

■

“Obtain the OpenBoot Prompt (Oracle ILOM CLI)” on page 40

■

“Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)” on page 41

Related Information

■

“Log In to Oracle ILOM” on page 19

■

“Booting and Shutting Down Oracle Solaris” on page 33

OpenBoot Prompt

When the host is powered on but the OS is not booted, you communicate with the OpenBoot

firmware. OpenBoot firmware displays 

ok

 as its prompt.

For more details about OpenBoot, refer to the 

OpenBoot 4.x Command Reference Manual

 at:

http://www.oracle.com/goto/openboot/docs

This table lists the common tasks that are performed at the 

ok

 prompt.

Task

For More Information

Boot the host.

“Boot the OS Manually (OpenBoot)” on page 35

Configure OpenBoot parameters.

“View All OpenBoot Parameters” on page 46

“Change the Default Boot Device (OpenBoot)” on page 44

Run diagnostics.

Refer to the service manual for your server, detecting and managing

faults.

38

SPARC and Netra SPARC S7-2 Series Servers Administration Guide • March 2017

Summary of Contents for Netra SPARC S7-2 Series



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands