manualshive.com logo in svg

Oracle Netra SPARC S7-2 Series, Administration Manual

Share
Download
Oracle Netra SPARC S7-2 Series Administration Manual Download Page 33

Booting and Shutting Down the OS

These topics include instructions for booting and shutting down the OS. Instructions for

obtaining the OpenBoot prompt are included, because some of these procedures are performed

at that prompt.

■

“Booting and Shutting Down Oracle Solaris” on page 33

■

“Obtaining the OpenBoot Prompt” on page 38

Related Information

■

“Controlling the Server” on page 25

Booting and Shutting Down Oracle Solaris

There are several ways to boot and shut down the OS.

Description

Links

Learn about the boot sequence.

“Boot Sequence” on page 34

Boot a server that is configured to boot at power-on (the

default configuration) using Oracle ILOM.

“Boot the OS (Oracle ILOM)” on page 35

Boot a server that is at the OpenBoot prompt.

“Boot the OS Manually (OpenBoot)” on page 35

Shut down the OS using an Oracle Solaris command.

“Shut Down the OS (

init

 Command)” on page 36

“Shut Down the OS (

shutdown

 Command)” on page 37

Related Information

■

“Powering the Server On and Off” on page 25

■

“Obtaining the OpenBoot Prompt” on page 38

Booting and Shutting Down the OS

33

Summary of Contents for Netra SPARC S7-2 Series



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands