manualshive.com logo in svg

Oracle EXADATA X6-2, Service Manual, Page: 119 / 284

Share
Download
Oracle EXADATA X6-2 Service Manual Download Page 119

Servicing FRUs

119

Servicing FRUs

The following sections describe how to service field-replaceable units (FRUs). For more

information about FRUs, see 

“Illustrated Parts Breakdown” on page 17

 and 

“Field-Replaceable

Units” on page 20

.

You must power down the system and disconnect the AC power cords from the server before

servicing any of these components.

Note - 

Only authorized Oracle Services personnel should service FRUs.

Description

Link

Service the processors.

“Servicing Processors (FRU)” on page 120

Service the Oracle PCIe NVMe switch card.

“Servicing the Oracle PCIe NVMe Switch Card

(FRU)” on page 137

Service the internal host bus adapter (HBA)

“Servicing the Internal HBA Card (FRU)” on page 140

Service the disk backplane.

“Servicing the Disk Backplane (FRU)” on page 150

Service the DVD drive.

“Servicing the DVD Drive (FRU)” on page 156

Service the front indicator module.

“Servicing the Front Indicator Module

(FRU)” on page 158

Service the motherboard.

“Servicing the Motherboard (FRU)” on page 162

Service the internal HBA cable assembly.

“Servicing the Internal HBA SAS Cable

assembly” on page 173

Service the Oracle PCIe NVMe switch card cables.

“Servicing the NVMe Cables” on page 177

Service the power, FIM, disk backplane data, and DVD

cables.

“Servicing the Power, FIM, Disk Backplane Data, and

DVD Cables” on page 181

Related Information

■

“Servicing CRUs That Do Not Require Server Power-Off” on page 63

■

“Servicing CRUs That Require Server Power-Off” on page 85

Summary of Contents for EXADATA X6-2





























































































































































































































































































Reviews:

No comments