Oracle EXADATA X6-2 Installation Manual Download

Page: 13 / 72

Shipping Inventory

Related Information

■

“Front Panel Status Indicators, Connectors, and Drives” on page 11

■

“Storage Server Components” on page 10

Shipping Inventory

Inspect the shipping cartons for evidence of physical damage. If a shipping carton appears

damaged, request that the carrier's agent be present when the carton is opened. Keep all contents

and packing material for the agent's inspection.

The carton contains the server and the ship kit. The ship kit for the Oracle Exadata Storage

Server X6-2 Extreme Flash includes the following items:

■

Power cords, packaged separately with country kit

■

Rackmount kit containing rack rails and installation instructions

■

Miscellaneous hardware, cables, and connectors

■

Legal and safety documents

Related Information

■

“Shipping Inventory” on page 13

Spares Kit Components

Oracle Exadata Database Machine X6-2 includes a spares kit. The contents of the spares kit

include:

■

One 3.2-TB PCIe-based NVMe SSD

Related Information

■

“Shipping Inventory” on page 13

■

“Storage Server Components” on page 10

Storage Server Features and Components

Summary of Contents for EXADATA X6-2









































































Search results

Summary of Contents for EXADATA X6-2

Reviews:

Related manuals for EXADATA X6-2

Brands by name

Popular brands

Oracle EXADATA X6-2, Installation Manual

Search results

Summary of Contents for EXADATA X6-2

Reviews:

Related manuals for EXADATA X6-2

Brands by name

Popular brands