manualshive.com logo in svg

Oracle Exadata Storage Server X7-2 EF, Service Manual

Share
Download
Oracle Exadata Storage Server X7-2 EF Service Manual Download Page 50

Safety Symbols

■

“Electrostatic Discharge Safety” on page 50

Safety Symbols

The following symbols might appear in this document. Note their meanings.

Caution - 

Risk of personal injury or equipment damage.

 To avoid personal injury or

equipment damage, follow the instructions.

Caution - 

Hot surface.

 Avoid contact. Surfaces are hot and might cause personal injury, if

touched.

Caution - 

Hazardous voltages are present.

 To reduce the risk of electric shock and danger to

personal health, follow the instructions.

Related Information

■

“Safety Precautions” on page 49

■

“Electrostatic Discharge Safety” on page 50

Electrostatic Discharge Safety

Devices that are sensitive to electrostatic discharge (ESD), such as the motherboard, PCIe

cards, drives, processors, and memory DIMMs require special handling. See 

“Contacting

Support” on page 47

Caution - 

The boards and drives contain electronic components that are extremely sensitive to

static electricity. Ordinary amounts of static electricity from clothing or the work environment

can destroy components. Do not touch the components along their connector edges.

Do the following when handling ESD-sensitive components:

■

Use an antistatic wrist strap.
Wear an antistatic wrist strap when handling components such as drive assemblies, boards,

or cards. When servicing or removing server components, disconnect the power cords from

50

Oracle Exadata Storage Server X7-2 EF and HC Service Manual • May 2018

Summary of Contents for Exadata Storage Server X7-2 EF





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands