Oracle E5-APP-B, Hardware And Installation Manual

Page: 41 / 60

Installing an E5-APP-B Card
To install an E5-APP-B card into an EAGLE shelf:
Note: The E5-APP-B Card should arrive in the LOCKED state. If it arrives UNLOCKED, skip to step
4.
1. On the E5-APP-B card, slide the Ejector switch (4) up to the UNLOCKED position. See Figure 10:
E5-APP-B Card Inject Hardware Switch, UNLOCKED .
Figure 10: E5-APP-B Card Inject Hardware Switch, UNLOCKED
2. Grasp the upper and lower card Inject/Eject (I/E) lever release (3) just underneath the I/E lever,
and press it to meet the I/E lever. This is the mechanical interlock for the card (see Figure 12:
E5-APP-B Card Inject Levers ).
3. While holding the I/E interlock and lever, pull the levers (2) away from the card until they are
parallel to the floor.
Figure 11: E5-APP-B Card UNLOCKED illustrates the angle of the interlocks and levers just before
inserting E5-APP-B Card into the EAGLE shelf.
41 910-6535-001 Revision D, February 2014
Installing and Removing E5-APP-B Cards Hardware and Installation Manual