manualshive.com logo in svg

Oracle Dual Port 25 Gb, User Manual

Share
Download
Oracle Dual Port 25 Gb User Manual Download Page 56

Change the MTU Temporarily (Oracle Solaris x86)

Note - 

Adding this line will make changes to all instances of bnxt. To make changes for

specific instances, see 

Step 2

 in 

“Set Driver Parameters (Oracle Solaris x86)” on page 51

.

■

Type:

# 

dladm set-linkprop -p mtu=9500 net0

Related Information

■

“Change the MTU Temporarily (Oracle Solaris x86)” on page 56

■

“Configure Jumbo Frames (Linux)” on page 56

Change the MTU Temporarily (Oracle Solaris x86)

Change the MTU temporarily with the 

dladm

(1M) command.

For example, where the device name is 

xnet0

, this command increases MTUs to the maximum:

# 

dladm set-linkprop [-t] -p mtu=9500 net0

The temporary setting lasts only until the next reboot of the server.

Related Information

■

“Change the MTU Permanently (Oracle Solaris x86)” on page 55

■

“Configure Jumbo Frames (Linux)” on page 56

■

“Configure Jumbo Frames (Windows)” on page 57

Configure Jumbo Frames (Linux)

Jumbo frames can support up to 9500 MTU. The default value is 1500 MTU.

Set the value for jumbo frames with the 

ifconfig

(1M) command.

For example, where the IP address for 

eth7

 is 

192.1.1.200

, this command increases MTUs to

the maximum:

# 

ifconfig eth7 192.1.1.200 mtu 9500 up

For more information, refer to the Oracle Solaris 

ifconfig

(1M)

 man page.

56

Oracle Dual Port 25 Gb Ethernet Adapter User's Guide • September 2017

Summary of Contents for Dual Port 25 Gb

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands