Oracle Dual Port 25 Gb, User Manual

Page: 51 / 88

Configuring Driver Parameters
The
bnxt
and
bnxt_en
device drivers control the adapter's interfaces. You can manually set the
device driver parameters to customize each device in the server.
These topics describe how to configure driver parameters:
Description Links
Configure driver parameters in the
Oracle Solaris x86 OS.
“Set Driver Parameters (Oracle Solaris x86)” on page 51
“Driver Parameters (Oracle Solaris x86)” on page 53
Configure driver parameters in Linux. “Set Driver Parameters (Linux)” on page 53
“Driver Parameters (Linux)” on page 54
Related Information
■
“Understanding the Installation Process” on page 11
■
“Understanding the Adapter” on page 15
■
“Updating Software and Firmware” on page 23
■
“Installing the Driver” on page 25
■
“Installing the Adapter” on page 31
■
“Configuring the Network” on page 39
■
“Troubleshooting the Adapter (Oracle Solaris x86)” on page 75
Set Driver Parameters (Oracle Solaris x86)
1.
Locate the path names and the associated instance numbers in the
/etc/
path_to_inst
file.
For example, on an Oracle Solaris x86 server, you should see output similar to this:
Configuring Driver Parameters 51