Oracle B31003-01 Page 56 User Manual Download

Page: 56 / 112

Installing Oracle Connect on an IBM OS/390 or z/OS Series Platform

6-8

Oracle Application Server Adapter for IMS/TM User’s Guide

The installation is completed. All

JCL

jobs and

REXX

procedures are written to the

INSTROOT

.USERLIB

library.

INSTROOT

is the high-level qualifier for the installation.

Postinstallation Instructions

The following postinstallation tasks must be done to work with Oracle Connect:

■

Postinstallation Procedures

■

Starting the Daemon

■

Setting Up Oracle Connect for Reentrancy

Postinstallation Procedures

Perform the following procedures after completing the installation to configure Oracle
Connect.

■

Allocate a dataset for

INSTROOT

.DEF.BRANDBIN

, using 1 track and with

RECFM=VB

and

LRECL=256

. The block size is 6233.

INSTROOT

is the high-level qualifier where Oracle Connect is installed.

■

Using FTP, copy the

BRANDBIN

file, in binary mode, from the

Oracle Connect\IMSTM Legacy Adapter

directory in the installation CD to

the mainframe, to

INSTROOT

.DEF.BRANDBIN

■

Define the

LOADAUT

library as an APF-authorized library.

Table 6–10 IMS/TM Adapter-Specific Installation Prompts and Responses

Screen

Response

ENTER THE ISPF LOAD LIBRARY NAME
[ISP.SISPLOAD] :

Enter the ISPF load library name only if you do not want the
default

PLEASE CONFIRM (YES/NO/QUIT) [YES] :

Confirm the entered details

ENTER THE OUTPUT CLASS FOR
INSTALLATION OUTPUT [A] :

Enter the output class for Oracle Connect output. Assigning
a device that is set on

HOLD

prevents the loss of log

information when the Oracle Connect started tasks finish
(the default is A).

DO YOU WANT TO USE THE DEFAULT JOB
CARD Y/N [Y]

A job card is displayed. If you want to use a replacement
card, then it must be entered as it will appear in the job. You
can enter up to six lines. Enter a blank card to end input.

If you do not enter a card, then the Oracle Connect default
card is used.

Summary of Contents for B31003-01

















































































































Search results

Summary of Contents for B31003-01

Reviews:

Related manuals for B31003-01

Brands by name

Popular brands

Oracle B31003-01, User Manual

Search results

Summary of Contents for B31003-01

Reviews:

Related manuals for B31003-01

Brands by name

Popular brands