Oracle B31003-01 Page 51 User Manual Download

Page: 51 / 112

Installing Oracle Connect on an IBM OS/390 or z/OS Series Platform

Installing and Configuring OracleAS Adapter for IMS/TM

6-3

Installing Oracle Connect on an IBM OS/390 or z/OS Series Platform

This section explains how to install Oracle Connect from the CD-ROM. This section
includes the following:

■

Installation Worksheet

■

Preinstallation Instructions

■

Installing the Kit

■

Installation Instructions

■

Postinstallation Instructions

Installation Worksheet

Verify that you have all the information detailed in the following installation
worksheets, so you can refer to it during the configuration process.

Table 6–4 Oracle Studio Software Requirements

Software Component

Requirements

Operating System

Microsoft Windows 2000 with service pack 2 or higher, or
Microsoft Windows XP, or Microsoft Windows 2003

Microsoft

Network transport protocol software, TCP/IP, included with
Microsoft Windows

Note:

If you have an Oracle Connect back-end adapter already

installed on the IBM OS/390 or z/OS platform, then follow the
instructions described in

"Updating an Existing Oracle Connect

Installation with IMS/TM"

on page 6-12.

The other back-end adapters that run on an IBM OS/390 or z/OS
platform are:

■

OracleAS Adapter for CICS

■

OracleAS Adapter for IMS/DB

■

OracleAS Adapter for VSAM

Table 6–5 Preinstallation Information

Topic

Required Information

Default

Comment

General

Operating system

OS/390 V2R5 or higher, or z/OS Series
V1R0 or higher

Disk space

150 cylinders

Memory

The minimum requirement is 4 MB for each
connection. A connection is defined as a
connection to a server process or daemon.
The actual memory requirement depends on
such things as the size of the database and
the number of databases accessed.

Installation high-level
qualifier

OCL1012

Volume

Summary of Contents for B31003-01

















































































































Search results

Summary of Contents for B31003-01

Reviews:

Related manuals for B31003-01

Brands by name

Popular brands

Oracle B31003-01, User Manual

Search results

Summary of Contents for B31003-01

Reviews:

Related manuals for B31003-01

Brands by name

Popular brands