Oracle 9200A, Safety And Compliance Manual

Page: 14 / 62

10
Oracle FS1-2 Safety and Compliance Guide • September 2014
Caution –
Slide/rail mounted equipment must not be used as a shelf or w orkspace.
Rack System Warning
The following warnings apply to Racks and Rack Mounted systems.
Caution –
For safety, equipment should always be loaded from the bottom up. That is, install the equipment
that will be mounted in the lowest part of the rack first, then the next higher systems, etc.
Caution –
To prevent the rack from tipping during equipment installation, the anti-tilt bar on the rack must be
deployed.
Caution –
To prevent extreme operating temperature within the rack insure that the maximum temperature
does not exceed the product’s ambient rated temperatures.
Caution –
To prevent extreme operating temperatures due to reduced airflow consideration should be made to
the amount of air flow that is re quired for a safe o peration of the equipment.
Caution –
Take adequate precautions when moving a rack or library that contains rack-installed equipment.
The weight of some rack equipment may have altered the rack or library center of gravity and could cause an
overbalance/tip condition during a move.
Caution –
For tape libraries, ensure that the equipment to be installed in the rack has UL Listing, CSA or C-
UL Certification, and is CE marked.
Laser Compliance Notice
Your Oracle product may contain Class 1M Laser Transceivers.
Caution –
Class 1M laser radiation when open. Do not view directly with optical instruments.
CD and DVD Devices
The following caution applies to CD, DVD, and other optical devices.