601656
Before inserting the appliance into the opening in the kitchen
worktop, the supplied foam gasket must be attached to the
lower side of the glass ceramic (glass) cooking hob (see
fi gure above).
Do not install the appliance without the foam
gasket!
The gasket should be attached to the appliance in the
following way:
- Remove the protective fi lm from the gasket.
- Then, attach the gasket to the lower side of the glass,
approximately 2-3 millimetres from the edge (as shown in
the fi gure). The gasket must be attached along the entire
length of the glass edge and should not overlap at the
corners.
- When installing the gasket, make sure that the glass does
not come into contact with any sharp objects.
NOTE!
On some appliances the gasket is already installed!
Installing the foam
gasket
19
Worktop cutout
dimensions
- SIVK6
min 20
558-560
min 600
488-490
min 40
47
min 50
595-600
520
51-55
