Document No.: M00-20-6000, Rev. 02
Page 9 of 13
2.7 Dial Back-up (Optional)
At this point, transactions should be processing properly over the IP connection, and you should be ready to test the Dial Back-
up functionality.
1. Plug a phone line into the
Line
port on the Ethernet IP Authorization Gateway.
IMPORTANT
: This phone line may be shared with another device, but should never be shared with a voice line.
2. Remove the CAT5 cable from the Ethernet IP Authorization Gateway
Ethernet
port.
3. Test the
Dial Back-up (DBU
) by running a test transaction for all processors (networks) supported at the site. These
test transactions will take longer than the high-speed transactions as they are running over a phone line instead of an IP
connection. You should receive a prompt stating
Select Pump
,
Enter Pump Number
or that the
Pump is Activated
;
this indicates that you have received authorization.
NOTE
: You do not need to pump fuel at this time.
4. Plug the
CAT5 Ethernet
cable back into the Ethernet IP Authorization Gateway Ethernet port.
NOTE
: If all tests were successful, you are now operating on high-speed processing. If any of the above tests failed, contact
the
OPW Help Desk at 877-679-8324
and select
Option 1
for Fuel Management Systems. Tell the Help Desk Technician
that you are installing an Ethernet IP Authorization Gateway and provide a description of the problem you are experiencing.