Document No.: M00-20-6000, Rev. 02
Page 4 of 13
1
Introduction
The following instructions explain the installation of your OPW Authorization Gateway with your FSC3000™ Fuel Site Controller,
as well as troubleshooting tips. It covers both the Ethernet IP Authorization Gateway and the Cellular Authorization Gateway.
OPW IP Authorization Gateways are certified to communicate with these OPW standard authorization networks:
OPW also offers two (2) cellular gateways for inbound-only communication. These devices allow access to the FSC3000 for
programming and transaction polling.
Figure 1-1 OPW Ethernet IP Authorization Gateway
Figure 1-2 OPW Cellular IP Authorization Gateway
1.1 OPW Ethernet IP Authorization Gateway
The OPW Ethernet IP Authorization Gateway, when used with the Petro Vend System2
®
or FSC3000™ Fuel Site Controller,
provides the ability to use a high-speed Internet connection to authorize fleet and/or credit-card transactions. This creates a
secure outbound IP connection for card authorizations and also allows inbound connections to the fuel-site controller. The
gateway also contains a dial-up modem that will automatically be used whenever the Internet is unavailable. To use this feature
the gateway must be plugged into a standard phone line.
If installing an Ethernet IP Gateway, proceed to Section 2, OPW Ethernet IP Authorization Gateway Installation of this
document.
NETWORK
OPW PART # - ETHERNET
OPW PART # - CELLULAR
CFN, T-Chek, TCH
20-6000
20-6005
NBS
20-6001
20-6006
Chase Paymentech
20-6002
20-6007
Buypass
20-6003
20-6008
CELLULAR – (Inbound Only) OPW PART #
Inbound Only (AT&T)
20-6009
Inbound Only (Verizon)
20-6010