OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 116 / 181

15.3.7 FleetOne
The FleetOne network processes the branded “FleetOne” cards.
When selected there are two options specific to its setup:
NETWORK option settings NETWORK : FleetOne
1 - Merchant ID....................
2 - Site Name......................
3 - Site City......................
4 - Site State.....................
5 - Redial Attempts................ 1
6 - Connect Time......(Seconds).... 30
7 - Local Authorization............ Disabled
8 - Network System................. ON
ON............................. 12:00 AM
OFF............................ 12:00 AM
9 - Authorization Message.......... ^0^FHAVE A SAFE TRIP
10 - Re-Prompt Time....(Minutes).... 10 (set to zero for DTC systems)
11 - Communication Parameters....... 2400 7E1 T60Y
12 - Processed via IP (ignore LRC).. YES
Enter option number or press [RETURN] to exit:
1. Merchant ID
Although shown as “Merchant ID” this is like the “Site ID” or “Terminal ID” shown on other networks, it is
provided by network when the site is boarded.
2-4. Setup Options 2-4
Options 2- 4 should be set up with information from the network. The Technician should contact the Merchant
for information.
5. Redial Attempts
The Redial Attempts option defines how many times the system will try to connect to the network. Default is 1.
6. Connect Time
The Connect Time option defines the maximum time to stay connected to the network when trying to approve
a card. If this time is reached, the transaction will be terminated.
7. Local Authorization
The Local Authorization option allows configuration of processing rules if the FSC can authorize network
cards offline down the host is down. Not all networks support this feature. If you enable Local Authorization
for a specific host you should first confirm with the host that this feature is allowed for the specific site.
NOTE: Depending on the host being configured different options may be presented.
Enter option number or press [RETURN] to exit: 7
Enable LOCAL AUTHORIZATION? (Y/N) : y
Enter NUMBER of Auth allowed (default = 1) : 15
ß
number of auth’s allowed
Enter DURATION in Mins. (default = 1) : 30
ß
number of minutes allowed
Allow KEYED Cards? (Y/N): N
ß
allowing keyed card numbers can increase risk
Doc. No.: M00-051.00 Rev.: 10
Page 116 of 181