Opvimus IF-7W120DCETH Operating Instructions Manual Download Page 25

 

 

IF-7WDCETH version 5.2.001 ENG 

25 

Class D wall-mounted amplifier 

with IP connection 

 

IF-7WDCETH 

4ETH 

11.

 

GUARANTEE 

 

1. GUARANTEE CERTIFICATE 

1. 

OPTIMUS  S.A.  guarantees  that  its  products  are  free  from  material  and 

manufacturing defects when they are first delivered to the purchaser. 

2. 

In accordance with the conditions outlined here, OPTIMUS S.A. guarantees 

its products for two (2) years from the date on which the purchaser acquires the 
product.  If,  within  this  guarantee  period,  defects  appear  which  are  not  due  to 
factors outlined in section 2, OPTIMUS S.A. shall replace or repair the unit using 
equivalent,  new  or  reconstructed  replacement  parts,  as  it  deems  fit.  If 
replacement  parts  are  applied  which  improve  the  unit,  OPTIMUS  S.A.  reserves 
the right to charge the client for the additional cost of these components. 

3. 

No guarantee benefits shall be provided other than those cited here. 

4. 

In order to claim  the  guarantee rights, it  shall  be an essential  requirement 

to present the original purchase invoice or the guarantee certificate. 

2. GUARANTEE PROVISIONS 

1. 

In the event that the product had to be modified or adapted to comply with 

local  requirements  concerning  technical  specifications  or  safety,  and  if  the 
country  in  question  is  not  the  country  for  which  the  product  was  originally 
designed  and  manufactured,  defects  are  not  considered  to  be  material  or 
manufacturing  defects.  Furthermore,  the  guarantee  does  not  cover  the 
execution  of  these  modifications  or  adaptations,  regardless  of  whether  or  not 
they have been carried out correctly. 

Nor  shall  OPTIMUS  S.A.  be  responsible  for  any  costs  under  this  guarantee  for 
these types of modifications. 

2. 

The  guarantee  shall  not  entitle  the  purchaser  to  inspection  or  free 

maintenance  or  repair  of  the  unit,  particularly  if  the  defects  are  due  to 
inappropriate  use.  Nor  do  the  guarantee  rights  cover  defects  in  wearing  parts 
that  become  worn  as  a  result  of  normal  wear  and  tear.  Wearing  parts  are,  in 
particular, potentiometers, switches/knapper, and similar parts. 

3. 

The guarantee does not cover defects in the equipment unit caused by: 

 

Abuse or incorrect use of the unit for purposes other than those for which it 
is  intended,  in  non-compliance  with  the  service  and  maintenance 
instructions  specified  in  the  Manual  and/or  Technical  Instructions  for  the 
unit. 

 

Stik/konnektor or use of the product in a manner that does not correspond 
to  the  technical  or  safety  requirements  of  the  country  in  which  the  unit  is 
used. 

 

Installation  in  conditions  other  than  those  indicated  in  the  Manual  and/or 
Technical Instructions. 

 

Deficiency  or  interruptions  in  the  electricity  supply  or  installation  defects 
which imply use in abnormal conditions. 

 

Damage  caused  by  other  equipment  units  that  are  connected  to  the 
product. 

 

The  use  or  installation  of  Software  (programmes),  interfaces,  parts  or 
supplies not provided and/or not authorised by OPTIMUS S.A. 

 

Fejlure to use the original packaging for transportation. 

 

Damage  caused  by  force  majeure  or  other  causes  not  attributable  to 
OPTIMUS S.A. 

4. 

The following elements are not covered by this guarantee: 

 

All plastic surfaces and all parts exposed to outdoor conditions which have 
been scratched or damaged as a result of normal or abnormal use. 

 

Breakages, knocks, damage due to a fall or scratches caused by moving the 
unit in any way. 

 

Damage  caused  by  tests,  use,  maintenance,  installation  or  inappropriate 
adjustments, or as a result of any alteration or modification of any kind not 
carried out by a Service Authorised by OPTIMUS S.A. in compliance with this 
guarantee. 

 

Damage to  persons or  property that  might be caused by the improper use 
of the equipment, including lack of maintenance. 

5. 

The guarantee shall not be valid whenever the following is observed: 

 

Amendments or corrections made to the details of the guarantee certificate 
or purchase invoice. 

 

Fejlure to produce the original invoice or the absence of a date on this. 

 

Absence of the serial or batch number on the equipment. 

6. 

In  the  case  of  personal  computers,  the  guarantee  will  not  cover  the 

elimination  of  computer  viruses,  the  restoration  of  programmes  damaged  by 
these or the reinstallation of the disk following its deletion. 

7. 

The rights of this guarantee are invalidated if the product has been repaired 

or opened by staff unauthorised by OPTIMUS S.A. or by the client himself. 

8. 

If  OPTIMUS  S.A.  were  to  establish  before  the  client  that  the  damage 

affecting the unit does not entitle a claim to be made under the guarantee, the 
costs of checking the equipment incurred by OPTIMUS S.A. shall be borne by the 
client. 

9. 

Products not covered by the guarantee shall only be repaired once payment 

has  been  effected  by  the  client.  In  the  event  that  the  guarantee  rights  do  not 
apply,  OPTIMUS  S.A.  shall  duly  inform  the  client.  If,  within  a  period  of  6  weeks 
from  this  communication,  no  written  repair  order  is  received  from  the  client 
confirming  acceptance  of  the  costs,  OPTIMUS  S.A.  shall  return  the  unit  in 
question  to  the  client.  In  this  case,  the  transport  and  packaging  costs  shall  be 
invoiced separately and payment shall  be made on delivery. In the event that a 
repair order is sent by the client, confirming that he assumes the costs of repair, 
the  transport  and  packaging  costs  shall  be  invoiced  additionally,  and  also 
separately. 

10.  If the equipment needs to be transferred to the Authorised Service Centre, 
transportation  shall  be  effected  by  the  responsible  party  according  to  the 
guarantee, who will also bear the freight and insurance costs. 

11.  In  the  event  of  a  defect,  OPTIMUS  S.A.  guarantees  that  the  repair  and/or 
replacement  of  parts  so  that  the  unit  operates  correctly  will  be  made  within  a 
period of no more than 30 days. Nevertheless, OPTIMUS S.A. would like to clarify 
that the normal period does not exceed 30 days. 

12.  All  parts  or  products  replaced  as  part  of  the  guarantee  services  shall 
become the property of OPTIMUS S.A. 

3. TRANSFER OF GUARANTEE  

The guarantee is solely awarded to the original purchaser (principal client) and is 
not  transferable.  With  the  exception  of  OPTIMUS  S.A.,  no  third  party  (dealers, 
etc.) is authorised to award additional guarantees on behalf of OPTIMUS S.A. 

4. CLAIMS FOR DAMAGE 

In the event that OPTIMUS S.A. cannot provide a suitable guarantee service, the 
purchaser shall not be entitled to claim any indemnity for damages arising. The 
responsibility held by OPTIMUS S.A. is limited in all cases to the invoicing price of 
the product. 

5. RELATION WITH OTHER GUARANTEE RIGHTS AND NATIONAL LAW 

1. This guarantee does not affect the rights of the purchaser with respect to the 
vendor arising from the contract of sale accomplished. 

2. These conditions of the guarantee provided by OPTIMUS S.A. are valid as long 
as  they  do  not  contradict  the  corresponding  national  law  on  guarantee 
provisions. 

3.  OPTIMUS  S.A.  guarantees  that  this  product  complies  with  the  safety 
regulations in force in the country. 

 

THIS  LIMITED  GUARANTEE  DECLARATION  IS  THE  EXCLUSIVE  GUARANTEE 
OFFERED  BY  OPTIMUS  S.A.  ALL  OTHER  EXPLICIT  OR  IMPLICIT  GUARANTEES  ARE 
EXCLUDED,  AND  THIS  ALSO  APPLIES  TO  GUARANTEES  OF  MARKETABILITY  AND 
SUITABILITY  FOR  A  PARTICULAR  PURPOSE.  (EXCEPT  WHEN  THESE  GUARANTEES 
ARE  REQUIRED  BY  AN  APPLICABLE  LAW).  NO  GUARANTEE,  EITHER  EXPLICIT  OR 
IMPLICIT, SHALL BE APPLIED ONCE THE GUARANTEE PERIOD HAS EXPIRED  
 
OPTIMUS S.A. 
After Sales Service 
C/ Barcelona 101 
17003 - GIRONA 
Tel. 972 203 300  
e-mail:girona@optimus.es 

 

 

 

 

 

 

 

1999/44/CE 

Summary of Contents for IF-7W120DCETH





















































Reviews: