Opvimus DC-700ETH, Operating Instructions Manual

Page: 14 / 66

DC-700ETH version 3.2.001 12
IP Microphone desk
and Control central
DC-700ETH
6. DISPLAY, GENERAL VIEW
In standby, the DC-700ETH displays the following information:
Name : Name, identifier of the unit in the installation
Version : Version of the unit firmware
4 tabs identified by icons are displayed at the top of the screen:
EMERGENCY
This menu allows viewing the units as well as the zones that are
in emergency mode. The following information is displayed by
the tab:
SYSTEM ALARMS
Enables to display the alarms in the system, showing the unit generating the alarm and the type of alarm.
SELECTION OF ZONES / GROUPS / MESSAGES
Allows selecting zones, groups and pre-recorded messages.
SETTINGS
Allows modifying certain parameters of the DC-700ETH (language, passwords, etc).
ATTENTION: In installations with a PC Server, modifications of the settings made from the DC-700ETH are temporary,
excepting the change of the volume of the zones and the assignment of the musical channels. In order for the changes
to be saved, they must be made from the PC Server via the
Call Point application.
7. NAVIGATING THROUGH THE MENUS
Using the navigation buttons you can access the different menus and configurations of the DC-700ETH.
Basic navigation through the menus:
-
Enter the selected menu
-
Confirm a data entry
-
Confirm a chosen option
-
Move between tabs (next tab)
-
Move between tabs
(previous tab)
-
Return to the top level menu
-
Move between options in a menu
(previous item)
-
Move between options in a menu
(next item)
Number of zones in Emergency Mode
that are making announcements
Total number of zones
in the installation
Total number of zones
in the installation Number of Emergency
Mode zones