4
4 OPERATION
HOT LAMINATING
•
Connect the laminator to the power supply outlet.
•
Slide the switch (2) to HOT position to start the heat up process. The indicator (3) will light
up in RED.
•
After 3-5 minutes heating process finishes and the LED (3) turns BLUE, now you are ready
to laminate.
•
Choose size and thickness of the foil pouch from 100 μm (2 x 50 μm ) to 160 μm (2 x 80
μm).
•
Place the item to be laminated into the laminating pouch, centring it with 3-5mm all
round the item.
•
Insert the sealed edge of the laminating pouch into the centre straight of the laminating
slot.
•
The laminating pouch will pass through the laminator and exit at the back. Remove the
laminating pouch when it has stopped moving.
•
Slide the switch to OFF after use.
•
Disconnect the laminator from the power supply outlet.
COLD LAMINATING
•
Connect the laminator to the power supply outlet.
•
Slide the switch (2) to COLD to start the laminating process. The indicator (3) will light up
in RED.
IMPORTANT! Cold laminating requires the laminator to be cooled down for about 2 hours
when it is switched from hot to cold laminating.
•
Only use laminating pouches that are expressly suitable for cold laminating.
•
Place the item to be laminated into the laminating pouch, centring it.
•
Insert the sealed edge of the laminating pouch into the centre straight of the laminating
slot.
•
The laminating pouch will pass through the laminator and exit at the rear of the lamina-
tor. Remove the laminating pouch when it has stopped moving.
3 LAYOUT
Laminating Insert
Rear Exit
ABS Switch
Slide Switch
Indicator
Part Names & Functions
Operation Guide
Maintenance
1. After using the machine, pls plug off the machine and pls don't cover up the small holes so as to
let out the heat.
2. Don't place heavy or sharp materials onto the machine in order not to distort or damage the machine.
3. Before and after laminating, you may insert 1pc of white paper so as to take out the possible dust in
the roller.
4. Don't clean the surface of the machine with corrosive solvent. Don't drop any water inside the
machine when cleaning the machine with a wet cloth, otherwise, it may lead to problems in PCB.
5. If the machine is unused for a long time, pls cover up the machine with a plastic or cloth to
get rid of the dust.
IMPORTANT
Do not touch the top of the laminator during use. The top of the laminator gets very hot during use
and takes approx. 3-4 hours to cool down after use.
Do not laminate any heat-sensitive material e.g. thermo-fax paper in this mode.
These materials are only suitable for cold laminating.
(A) HOT LAMINATING
OFF
COLD
HOT
HOT LAMINATING
OFF
COLD
HOT
COLD LAMINATING
1. Connect the laminator to the power supply outlet.
2. Slide the switch to HOT to start the heating process. The indicator
will light up in RED.
3. After 3-5 minutes heating process, the indicator will light up in
BLUE, meaning the laminator has reached the correct operating
temperature and is ready to laminate.
4. Place the item to be laminated into the laminating pouch, centring
it within the pouch alongside the pre-sealed edge. Leave a margin
of 3-5mm all round the item.
* Do not use pouches thicker than 160micron(2X80micron per side) or less than
100micron(2X50micron per side).
(B) COLD LAMINATING
IMPORTANT
Cold laminating requires the laminator to be cooled down for about 2 hours when it is
switched from hot to cold laminating.
CLEARING
A
BLOCKAGE
This laminator is equipped with an anti-blockage function to resolve any
blockage of the laminating items during laminating.
1. Slide the switch to OFF and disconnect the laminator from the power supply outlet immediately when it’s
jammed. Cool the laminator down briefly.
2. Slide and hold the anti-blockage switch (ABS) on the back of the laminator as in the direction indicated by
the arrow sign, and pull the jammed item completely out from the laminator opening.
ABS Switch
ABS
1. Connect the laminator to the power supply outlet.
2. Slide the switch to COLD to start the laminating process. The indicator will light up in RED.
3. Insert the cold laminating pouches straightly into the centre of the laminator opening. Only use laminating
pouches that are expressly suitable for cold laminating.
4. The laminating pouch will pass through the laminator and exit at the rear of the laminator. Remove the
laminating pouch when it has stopped moving.
5. Slide the switch to OFF after use.
6. Disconnect the laminator from the power supply outlet.
Attentions for Operation
In order to use the machine properly and avoid causing any damage or loss to yourselves and others,
we use diagrams and icons in this operation manual to illustrate. Kindly pls refer to following form
for detailed meanings. Pls make sure that following form is well understood before you read the
rest contents in this manual.
Attentions!
Don't place any other substance
onto the machine.
* It may be hurt.
Don't disassemble, rebuild or repair
the machine on your own.
* This may cause an electric shock or
accidental hurt.
Pls make sure that you use the correct
voltage, and don't use several power
cords.
* This may cause an electric shock or
fire disaster.
When the machine is working,
don't touch the covers;
* Maybe you will get hurt.
If the machine is not used for a long
time, pls plug off the machine and in
sert the power cord into the power cord slot.
* This may cause an electric shock or fire disaster.
If the machine is over preheated, or there is
a strange smell, or there is a paper jam,
pls stop using the machine and plug it off
immediately.
* This may cause an electric shock or fire
disaster.
5. Insert the sealed edge of the laminating pouch straightly into the centre of the laminator opening.
6. The laminating pouch will pass through the laminator and exit at the rear of the laminator.
Remove the laminating pouch when it has stopped moving.
7. Some sorts of paper do not laminate evenly, or appear somewhat cloudy. In such cases the lamination
can be fed through the laminator a second time and the
lamination process repeated.
8. Slide the switch to OFF after use.
9. Disconnect the laminator from the power supply outlet.
6
1
2
3
4
5
1. Lamination slot
2. Three position switch COLD/OFF/HOT
3. LED indicator
4. Anti-block system ABS
5. Housing
6. Exit
