2
1 HEALTH & SAFETY PRECAUTIONS
•
Before operating the equipment please read the Health & Safety precautions, manufacturer’s
recommendations and the operation manual.
•
The operation manual should be easily available at any time for the operator.
•
The equipment should be installed on a sturdy level surface near a 220-240 V, 50 - 60 Hz
AC correctly earth socket.
The equipment:
•
Should be protected against dust and moisture.
•
Must not be placed near a heating or ventilation unit.
•
Should not be used in vicinity of inflammable liquids or gases.
•
Power supply cable must be protected against damage.
•
Must not be used to pull or move the equipment or to remove the plug from the socket.
•
During long standstill or moving the equipment and to ensure that it is turned off com-
pletely, remove the plug from the mains socket.
•
Should be kept away and out of the reach from children and animals.
•
Must not be used for any other purposes, than those indicated in the instruction manual.
DANGER!
•
The equipment contains electrically driven rollers. Ensure long hair, loose jewellery, ties
and other loose clothing are kept away from the entry slot they could get entangled in
the rollers.
•
It is necessary to check and supervise, if the equipment is operated and used correctly, if
there should be a malfunction, you must contact the dealer or service team.
•
The equipment must not be located outside and should be operated in a room tempera-
ture higher than +8 °C.
•
Before removing any covers from the equipment, remove the power plug from
a mains socket.
•
Using inappropriate lubricants such as petroleum based cleaning materials, can cause a
fire HAZARD.
•
Only authorized and qualified staff may carry out any repairs during the Guarantee/War-
ranty period.
•
The equipment must be operated in accordance with the general Health & Safety rules.
•
Do not leave the equipment operating without an operator.
•
After use turn the equipment off by the switch on unit, next remove the plug from a socket
if not in regular use.
• HAZARD Warning the top of the laminator gets hot during use.
