• Green indicator flash: Lower photo sensor broken – contact the service team.
• Red and green indicator flash alternately: Upper and lower sensors broken – contact the service
team.
BINDING
• Place plastic combs into the binding mechanism fence upwards the side to be opened towards
you.
• Pull the handle (9) down slowly to open the comb.
• Insert the front cover first then the punched documents on to the fingers of the open comb,
then the back cover.
• Push forward the handle (9) to close the comb and take out the document.
• The bound document is now ready.
10
5
POSSIBLE MALFUNCTIONS
Malfunction
Cause
Remedy
When punching cannot be
made.
Paper scraps or other material
stuck inside the paper slot.
Clean up the paper slot.
Exceeded punching capacity.
Reduce number of sheets
punched at one time (accord-
ing to the user’s guide).
Bent paper margin.
Paper bent while inser-
ting the sheets into the pa-
per slot.
Pull out and insert the paper
once again into the paper
slot.
Paper scraps or other material
stuck inside the paper slot.
Clean up the paper slot.
Paper is not punched com-
pletely and it is hard to pull it
out of the paper slot.
Exceeded punching capacity.
Reduce number of sheets
punched at one time (accord-
ing to the user’s guide).
6
TECHNICAL DATA
Max punching capacity:...................................................................................30 sheets*
Max binding capacity:..............................................................................................510
Max paper format:....................................................................................................A4
Margin depth adjustment: 4 steps:............................................3 mm / 5 mm / 7 mm / 9 mm
Distance between knives:..................................................................................8.46 mm
Number of knives:.....................................................................................................21
Number of selectable knives:.......................................................................................21
Dimensions of a hole:......................................................................................3 x 8 mm
Net weight:.......................................................................................................17.2 kg
Gross weight:...................................................................................................18.8 kg
Dimensions:............................................................................H 256 x W 400 x D 425 mm
Voltage:.................................................................................................AC 230 V 50 Hz
Input current:.........................................................................................................1 A
*paper 80 g/m
2
