Opus Coverator 330, User Manual

Page: 3 / 15

User guide Coverator 330
3
R
ECOMMENDATIONS
:

Use only recommended supplies and accessories.

Unplug the equipment and allow to cool down, before moving or during long
standstills.

Always insert the closed, end or side of the pouch cover into the laminator first.

Putting the open edge first can cause air bubbles and the pouch to wrap round the
rollers and destroy the document inside, plus damage the rollers.

It is recommended to put the O.Pouch Cover in a thin paper carrier before putting it
into the feed slot of the Coverator. It will prevent the rollers from being damage,
caused by excess glue coming out of the edges of the cover.

Thickness of the CARRIER must be about 40
gr/m². Thicker paper will cause bad
lamination.

If the document gets jammed inside the laminator, use the reverse function button
on the front (see diagram below) to remove cover/document.

Remove all metal elements (paper clips, clamps, staples etc.) before laminating.
E
QUIPMENT CONFIGURATION DIAGRAM
(
DIAG
) 1