Opus Air OPUS OP2, Owner'S Handbook Manual

Page: 9 / 39

opuscamper.com.au
07
11 QUICK TIPS TO SET UP
AND PACK UP YOUR
AIR OPUS®
During canopy inflation make sure
all external air valves are closed off
and the main air valve is open
before turning air pump on.
TIP 7
During annexe inflation make sure the air valves
are closed off before turning air pump on BUT
MAKE SURE the cross filling tube valve is OPEN
so that the air from the canopy can purge/travel
through to the air beams on to help.
TIP 8
Remember to turn the MAIN
INFLATION valve in the camper to
the horizontal CLOSED position when
inflation is complete otherwise the
canopy may slowly deflate over time.
TIP 9
Before you set off on your first trip,
do a couple of full set ups and while
you have all the canopy and annexe
up, remember to weather-in the
canvas and allow to dry completely
before packing up!
TIP 11
If the beams are losing air slightly you can turn
the inbuilt air pump ON and that will top up
the air pressure in all air beams back to the
desired pressure, the pump will turn OFF
automatically.
TIP 10
External Inflating / DeflatingAir Valve
To OPEN valve turn counter clockwise.
To CLOSE valve turn clockwise until firm.
CLOSED
OPEN
IMPORTANT
Remember to open the
main valve while inflating.